Wireless-N Multifunction VPN Router Cisco RV180W

Specifications

Description

Standards

IEEE 802.11n, 802.11g, 802.11b, 802.3, 802.3u, 802.1D, 802.1p, 802.11e, 802.11w (Rapid Spanning Tree) 802.1X (security authentication), 802.1Q (VLAN), 802.11i (Wi-Fi Protected Access [WPA2] security), 802.11e (wireless QoS), IPv4 (RFC 791), IPv6 (RFC 2460), Routing Information Protocol (RIP) v1 (RFC 1058), RIP v2 (RFC 1723)

Ports

LAN, WAN

Switch

Power button (on/off)

Buttons

Reset

Cabling Type

Category 5e or better

LEDs

Power, WPS, WAN, wireless, LAN (ports 1-4), Additional LEDs for multifunction router, access point, bridge on RV180W

Operating System

Linux

Network

Network Protocols

- Dynamic Host Configuration Protocol (DHCP) server

- Point-to-Point Protocol over Ethernet (PPPoE)

- Point-to-Point Tunneling Protocol (PPTP)

- Layer 2 Tunneling Protocol (L2TP)

- DNS proxy

- DHCP relay agent

- IGMP proxy and multicast forwarding

- Rapid Spanning Tree Protocol (RSTP)

- Network Address Translation (NAT), Port Address Translation (PAT)

- One-to-One NAT

- Port management

- Port mirroring

- Software configurable DMZ to any LAN IP address

- Session Initiation Protocol (SIP) Application Layer Gateways (ALG)

LAN

- Four (4) 10/100/1000 Mbps Gigabit LAN ports with managed switch

WAN

- One (1) 10/100/1000 Mbps Gigabit WAN port

WLAN

- Built-in high-speed 802.11n wireless access point

Routing Protocols

- Static routing

- Dynamic routing

- RIP v1 and v2

- Inter-VLAN routing

Network Address Translation (NAT)

Port Address Translation (PAT), Network Address Port Translation (NAPT) protocol

VLAN Support

Port-based and 802.1Q tag-based VLANs

Number of VLANs

4 active VLANs (3-4096 range)

IPv6

- Dual-stack IPv4 and IPv6

- 6to4 tunneling

- Multicast Listener Discovery (MLD) for IPv6 (RFC2710)

- Stateless address auto-configuration

- DHCPv6 Server for IPv6 Clients on LAN

- DHCP v6 client for WAN connectivity

- Internet Control Message Protocol (ICMP) v6

- Static IPv6 Routing

- Dynamic IPv6 Routing with RIPng

Network Edge (DMZ)

Software configurable to any LAN IP address

Layer 2

802.1Q-based VLANS, 4 active VLANS

Security

Firewall

Stateful packet inspection (SPI) firewall, port forwarding and triggering, denial-of-service (DoS) prevention, software-based DMZ

DoS Attacks Prevented:

SYN Flood Detect Rate (max/sec)

Echo Storm (ping pkts/sec)

ICMP Flood (ICMP pkts/sec)

Block UDP Flood

Block TCP Flood

Block Java, Cookies, Active-C, HTTP Proxy

Access Control

IP access control lists; MAC-based wireless access control

Content Filtering

Static URL blocking or keyword blocking

Secure Management

HTTPS, username/password complexity

WPS

Wi-Fi Protected Setup

Certificate Management

Self-signed SSL certificate, import/export certificate using Privacy-Enhanced Mail (PEM) format

User Privileges

2 levels of access: admin and guest

VPN

IPsec VPN

10 gateway-to-gateway IPSec tunnels

QuickVPN

10 Quick VPN tunnels using Cisco QuickVPN client

PPTP VPN

10 PPTP tunnels for remote client access

Encryption

Triple Data Encryption Standard (3DES)

Authentication

MD5/SHA1

VPN Pass-through

IPsec/PPTP/Layer 2 Tunneling Protocol (L2TP) pass-through

Quality of Service

QoS

- 802.1p port-based priority on LAN port, application-based priority on WAN port

- 4 queues

- Differentiated Services Code Point support (DSCP)

- Class of Service (CoS)

- Bandwidth Management for service prioritization

Jumbo Frame

Supports Jumbo Frame on Gigabit ports - at least 1536B

Performance

NAT Throughput

800 Mbps

Concurrent Sessions

12,000

IPsec VPN Throughput

(3DES/AES)

50 Mbps

Configuration

Web User Interface

Simple, browser-based configuration (HTTP/HTTPS)

Management

Management Protocols

Web browser, Simple Network Management Protocol (SNMP) v3, Bonjour, Universal Plug and Play (UPnP)

Event Logging

Local, syslog, email alerts

Network Diagnostics

Ping, Traceroute, and DNS Lookup

Upgradability

Firmware upgradable through web browser, imported/exported configuration file

System Time

Supports NTP, Day Light Savings, Manual entry

Languages

GUI supports English, French, Italian, German, Spanish, and Japanese

Wireless

Radio and modulation type

802.11b: direct sequence spread spectrum (DSSS), 802.11g: orthogonal frequency division multiplexing (OFDM), 802.11n: OFDM

WLAN

2.4GHz IEEE 802.11n standard-based access point with 802.11b/g compatibility

Operating channels

11 North America, 13 most of Europe, auto channels selection

Wireless isolation

Wireless isolation between clients

External antennas

2 fixed antennas

Antenna gain in dBi

1.8 dBi

Transmit power

802.11b: 17 dBm +/- 1.5 dBm; 802.11g: 15 dBm +/- 1.5 dBm; 802.11n: 12.5 dBm +/- 1.5 dBm

Receiver sensitivity

-87 dBm at 11 Mbps, -71 dBm at 54 Mbps, -68 dBm at mcs15, HT20, -66 dBm at mcs15, HT40 

Radio Frequency

Single-band, works on 2.4GHz

Wireless Domain Service (WDS)

Allows wireless signals to be repeated by up to 3 compatible devices

Operating Modes

Multifunction device-wireless router, access point mode with WDS, Point-to-Point Bridge mode with WDS, Point-Multi Point Bridge mode with WDS, Repeater mode with WDS

Active WLAN clients

Recommended 10 concurrent client (max 16) in wireless router mode; and 20 concurrent client (max32) in wireless Access Point mode

Multiple SSIDs

Supports multiple Service Set Identifiers (SSIDs), up to 4 separate virtual networks

Wireless VLAN map

Supports SSID to VLAN mapping with wireless client isolation

WLAN security

Wired Equivalent Privacy (WEP), WPA, WPA2-PSK, WPA2-ENT, 802.11i

Wi-Fi Multimedia (WMM)

WMM with QoS (802.1e), WMM power save (WMM-PS)

Environmental

Power

12V 1A

Certifications

FCC class B, CE, IC, Wi-Fi