24-port SFP+/SFP with 4-port QSFP+ Switch JUNIPER EX4600-40F-AFO

24-port SFP+/SFP with 4-port QSFP+ Switch JUNIPER EX4600-40F-AFO

- 24 SFP+/SFP ports, 4 QSFP+ ports, 2 expansion slots, redundant fans, 2 AC power supplies, front to back airflow

Configuration

- Fixed 10GbE ports with 10G-USR optics, all ports forwarding (line rate), <10m

- 4 fixed 40GbE ports with 40G-SR4 optics

- 1 4x40GbE QIC card with 4 40G-SR4 optics

- 1 8x10GbE QIC card with 8 10G-USR optics, all ports forwarding (line rate), <10 m

- Dual power supplies

Hardware

- Switching capacity: 720 Gbps (unidirectional)/1.44 Tbps (bidirectional)

- Layer 2/Layer 3 throughput (maximum with 64 byte packets): 1,071 Mpps (wire speed)

- Weight: 9.84kg with PSUs and fans installed

- Dimensions (HxWxD): 4.37 x 44.09 x 52.02 cm

- Switching mode: Cut-through and store-and-forward

- Airflow: front to back

Performance Scale (Unidimensional)

- MAC addresses per system: 288,000

- VLAN IDs: 4,091

- Number of ports per LAG: 32

- Number of FCoE VLANs/FC virtual fabrics: 4,095

- Firewall filters: 4,000

- IPv4 unicast routes: 128,000 prefixes; 208,000 host routes

- IPv4 multicast routes: 104,000

- IPv6 multicast routes: 52,000

- IPv6 unicast routes: 64,000 prefixes

- Address Resolution Protocol (ARP) entries: 48,000

- Jumbo frame: 9,216 bytes

Layer 2 Features

- STP-IEEE 802.1D (802.1D-2004)

- Rapid Spanning Tree Protocol (RSTP) (IEEE 802.1w); MSTP (IEEE 802.1s)

- Bridge protocol data unit (BPDU) protect

- Loop protect

- Root protect

- RSTP and VSTP running concurrently

- VLAN-IEEE 802.1Q VLAN trunking

- Routed VLAN interface (RVI)

- Port-based VLAN

- MAC address filtering

- GRE tunneling

- QinQ

- VLAN translation

- Static MAC address assignment for interface

- Per VLAN MAC learning (limit)

- MAC learning deactivate

- Link Aggregation and Link Aggregation Control Protocol (LACP) (IEEE 802.3ad)

- IEEE 802.1AB Link Layer Discovery Protocol (LLDP)

- MAC notification

- MAC address aging configuration

- MAC address filtering

- Persistent MAC (sticky MAC)

Layer 3 Features (IPv4)

- Static routing

- Routing policy

- Routing protocols (RIP, OSPF, IS-IS, BGP, MBGP)

- Virtual Router Redundancy Protocol (VRRP)

- Bidirectional Forwarding Detection (BFD) protocol

- Virtual router

- Dynamic Host Configuration Protocol (DHCP) relay

- Proxy Address Resolution Protocol (ARP)

- Multicast Features

- Internet Group Management Protocol (IGMP): v1, v2, v3

- IGMP snooping: v1, v2, v3

- IGMP filter

- PIM-SM

- Multicast Source Discovery Protocol (MSDP)

- Security and Filters

- Secure interface login and password

- RADIUS

- TACACS+

- Ingress and egress filters: Allow and deny, port filters, VLAN filters, and routed filters, including management port filters

- Filter actions: Logging, system logging, reject, mirror to an interface, counters, assign forwarding class, permit, drop, police, mark

- SSH v1, v2

- Static ARP support

- Storm control, port error deactivate, and autorecovery

- Control plane denial-of-service (DoS) protection

- Dynamic ARP inspection (DAI)

- DHCP snooping

- Filter based forwarding

- IP directed broadcast traffic forwarding

- IPv4 over GRE (encap and decap)

Layer 3 Features (IPv6)

- Static routing

- Routing protocols (RIPng, OSPF v3, IS-IS v6, BGP v6)

- Virtual Router Redundancy Protocol (VRRP v3)

- IPv6 CoS (BA, MF classification and rewrite, scheduling based on TC)

- IPv6 over MPLS LSPs (6PE)

- IPv6 ping

- IPv6 traceroute

- Neighbor discovery protocol

- Path MTU discovery

- SNMP, NTP, DNS, RADIUS, TACACS+, AAA

- Virtual router support for IPv6 unicast