Hỗ trợ kinh doanh

Ms. Linh: 0918 489 013
Ms. Lê: 0916 514 469
Ms. Tuyết: 0915 762 088
Ms. Hiên: 028-73001535
Ms. Tuyền: 028-7300 1535
Ms. Thảo: 028-3588 6355
Ms. Vân: 0914 801 001

Chăm sóc khách hàng

0916 287 068

24-Port Gigabit PoE Switch Cisco SGE2000P-EU

Trang Chủ >> Thiết bị mạng >> Thiết bị mạng Cisco >> 24-Port Gigabit PoE Switch Cisco SGE2000P-EU
Mã số:04210049
24-Port Gigabit PoE Switch Cisco SGE2000P-EU

24-Port Gigabit PoE Switch Cisco SGE2000P

-       The Cisco® SGE2000P 24-Port Gigabit Switch (Figure 1) helps maximize system availability, with fully redundant stacking and dual images for resilient firmware upgrades. The switch helps secure the network through IEEE 802.1Q VLANs, IEEE 802.1X port authentication, access control lists (ACL), denial-of-service (DoS) prevention, and MAC-based filtering. The enhanced quality of service (QoS) and traffic-management features help ensure clear and reliable IP voice and video communications.

-       For wireless or voice over IP (VoIP) deployments, the Cisco SGE2000P supports the IEEE802.3af standard for Power over Ethernet (PoE). Automatic load sensing in the power control circuitry automatically detects PoE on the end device before providing power. For safety, each port has independent overload and short-circuit protection, along with LED indicators for power status. A maximum of 15.4W is available on the Fast Ethernet ports for powering PoE-enabled wireless access points or VoIP handsets, with a maximum per-device PoE delivery of 185W available for all ports.

Features

-       Twenty-four 10/100/1000Mbps PoE Ethernet ports

-       Four Small Form-Factor Pluggable (SFP) slots (shared with four copper ports) for fiber Gigabit Ethernet expansion

-       IEEE 802.3af PoE delivered over any of the twenty-four 10/100/1000 copper ports

-       Up to 15.4W available on the copper ports for powering PoE-enabled wireless access points or VoIP handsets, with a maximum per-device PoE delivery of 185W available for all ports

-       Dual images for resilient firmware upgrades

-       48-Gbps, nonblocking, store-and-forward switching capacity

-       Simplified QoS management using 802.1p, Differentiated Services (DiffServ), or type of service (ToS) traffic prioritization specifications

-       Fully resilient stacking for optimized growth with simplified management

-       ACLs for granular security and QoS implementation

-       Can be configured and monitored from a standard web browser

-       Secure remote management of the switch via Secure Shell (SSH) and SSL encryption

-       802.1Q-based VLANs enable segmentation of networks for improved performance and security

-       Private VLAN Edge (PVE) for simplified network isolation of guest connections or autonomous networks

-       Automatic configuration of VLANs across multiple switches through Generic VLAN Registration Protocol (GVRP) and Generic Attribute Registration Protocol (GARP)

-       User/network port-level security via 802.1X authentication and MAC-based filtering

-       Increased bandwidth and added link redundancy with Link Aggregation Control Protocol (LACP)

-       Enhanced rate-limiting capabilities, including back pressure and multicast and broadcast flood control

-       Port mirroring for noninvasive monitoring of switch traffic

-       Jumbo frame support up to 10KB

-       Simple Network Management Protocol (SNMP) versions 1, 2c, and 3 and Remote Monitoring (RMON) support

-       Fully rack mountable using the included rack-mounting hardware

Specifications

Ports

- 24 RJ-45 connectors for 10BASE-T/100BASE-TX/1000BASE-T with 4 shared Gigabit SFP slots

- Console port

- Auto medium dependent interface (MDI) and MDI crossover (MDI-X)

- Auto negotiate/manual setting

- RPS port for connecting to redundant power supply unit

Buttons

Reset button

Cabling type

- Unshielded twisted pair (UTP) Category 5 or better for 10BASE-T/100BASE-TX

- UTP Category 5 Ethernet or better for 1000BASE-T

LEDs

PWR, Fan, Link/Act, PoE, Speed, RPS, Master, Stack ID 1 through 8

PoE

IEEE 802.3af PoE delivered over any of the twenty-four 10/100/1000 ports; power budget allows for max power of 15.4W on up to 12 ports simultaneously.

Performance

Switching capacity

Up to 48 Gbps, nonblocking

Forwarding rate

Up to 35.7 mpps

(based on 64-byte packets)

Stacking

Stack operation

- Up to 8 units in a stack (192 ports)

- Hot insertion and removal

- Ring and chain stacking options

- Master and backup master for resilient stack control

- Auto-numbering or manual configuration of units in stack

Layer 2

MAC table size

8000

Number of VLANs

256 active VLANs (4096 range)

VLAN

- Port-based and 802.1Q tag-based VLANs

- Protocol-based VLAN

- Management VLAN

- PVE, GVRP

Head-of-line (HOL) blocking

HOL blocking prevention

Layer 3

Layer 3 options

- Static routing

- CIDR (classless interdomain routing)

- 128 static routes

- IPv4

- Forwarding in silicon – wire-speed forwarding of Layer 3 traffic

IPv6

IPv6

IPv6 Host Mode

IPv6 over Ethernet

Dual IPv6/IPv4 stack

IPv6 Neighbor and Router Discovery (ND)

IPv6 Stateless Address Autoconfiguration

Path MTU Discovery

Duplicate Address Detection (DAD)

ICMPv6

IPv6 over IPv4 network with ISATAP tunnel support

IPv6 QoS

Prioritize IPv6 packets in hardware

IPv6 ACL

Drop or Rate Limit IPv6 packets in hardware

MLD Snooping

Deliver IPv6 multicast packets only to the required receivers

IPv6 Applications

Web/SSL, Telnet Server/SSH, Ping, Traceroute, SNTP, TFTP, Radius, Syslog, DNS Client

IPv6 RFCs Supported

RFC2463 – ICMPv6

RFC3513 – IPv6 Address architecture

RFC 4291 – IP Version 6 Addressing Architecture

RFC 2460 – Internet Protocol v6 (IPv6) Specification

RFC 2461 – Neighbor Discovery for IPv6

RFC 2462 – IPv6 Stateless Address Auto-configuration

RFC 1981 – Path MTU Discovery

RFC 4007 – IPv6 Scoped Address Architecture

RFC3484 – Default address selection mechanism is described by RFC3484

RFC4214 – ISATAP tunneling

RFC4293 – MIB IPv6: Textual Conventions and General Group

RFC 3595 – Textual Conventions for IPv6 Flow Label

Management

Web user interface

Built-in web user interface for easy browser-based configuration (HTTP/HTTPS)

SNMP

SNMP versions 1, 2c, and 3 with support for traps

SNMP MIBs

RFC1213 MIB-2, RFC2863 interface MIB, RFC2665 Ether-like MIB, RFC1493 bridge MIB, RFC2674 extended bridge MIB (P-bridge, Q-bridge), RFC2819 RMON MIB (groups 1, 2, 3, and 9 only), RFC2737 entity MIB, RFC3621 Power Ethernet MIB, RFC 2618 RADIUS client MIB, RFC1215 traps

RMON

Embedded RMON software agent supports 4 RMON groups (history, statistics, alarms, and events) for enhanced traffic management, monitoring, and analysis.

Port mirroring

Traffic on a port can be mirrored to another port for analysis with a network analyzer or RMON probe

Security

IEEE 802.1X

- 802.1X – RADIUS authentication; MD5 hash

- Guest VLAN

- Single/multiple host mode

Access control

ACLs – drop or rate limit based on:

- Source and destination MAC-based

- Source and destination IP address

- Protocol

- Port

- VLAN

- Differentiated services code point ( DSCP)/IP precedence

- TCP/ User Datagram Protocol (UDP) source and destination ports

- 802.1p priority

- Ethernet type

- Internet Control Message Protocol (ICMP) packets

- Internet Group Management Protocol (IGMP) packets

- Up to 1018 rules

Availability

Link aggregation

- Link aggregation using IEEE 802.3ad LACP

- Up to 8 ports in up to 8 groups

Storm control

Broadcast and multicast storm protection

DoS prevention

DoS attack prevention

Spanning Tree

- IEEE 802.1D Spanning Tree

- IEEE 802.1w Rapid Spanning Tree

- IEEE 802.1s Multiple Spanning Tree, Fast Linkover

IGMP snooping

IGMP (versions 1 and 2) snooping limits bandwidth-intensive video traffic to only the requestors. Supports 256 multicast groups.

QoS

Priority levels

4 hardware queues

Scheduling

Priority queuing and weighted round-robin (WRR)

Class of service

- Port based

- 802.1p VLAN priority based

- IPv4 IP precedence/ToS/DSCP based

- DiffServ

- Classification and re-marking ACLs

Rate limiting

- Ingress policer

- Egress rate control

Standards

802.3 10BASE-T Ethernet, 802.3u 100BASE-TX Fast Ethernet, 802.3ab 1000BASE-T Gigabit Ethernet, 802.3z Gigabit Ethernet, 802.3x flow control, 802.3ad LACP, 802.3af POE, 802.1d Spanning Tree Protocol (STP), 802.1Q/p VLAN, 802.1w Rapid STP, 802.1s Multiple STP, 802.1X port access authentication

Environmental

Dimensions

17.32 x 14.70 x 1.73 in.

W x D x H

(440 x 375 x 44 mm)

Unit weight

15.85 lb (7.19 kg)

Certification

UL (UL 60950), CSA (CSA 22.2), CE Mark, FCC Part 15 (CFR 47) Class A

Number of fans

5

Acoustic noise

55 dB Max.

Power

100–240V AC, 50–60 Hz, internal, universal; also equipped with redundant power supply connector for external power supply, 48V DC

Power consumption

- No PoE supplied: 12V at 8.5A (102W)

- 12 ports half power (7.5W):192W

- 12 ports full power (15W): 282W

- 24 ports half power (7.5W): 282W

-        Bảo hành: 12 tháng.

Giá: Vui lòng gọi

Số lượng :

Thêm vào giỏ Mua ngay


Chia se tren Facebook
Sản phẩm liên quan

Tel:(028) 7300 1535
Showroom:92K Nguyễn Thái Sơn - Phường 3 - Q.Gò Vấp - Tp.HCM
Website:www.sieuthivienthong.com
Email:info@sieuthivienthong.com