Photoelectric Beam Sensor Outdoor TAKEX PB-200HF-KH

Photoelectric Beam Sensor Outdoor TAKEX PB-200HF-KH

- 4 Synchronized High Power Infrared:

   + 4 beams are 'and-gated', which helps to prevent false alarms from falling leaves and small animals.

   + The active infrared transmission is exceptionally strong with a maximum arrival distance ten times greater than the specified protection distance.

   + External light compensation circuit provides excellent tolerance against sun light, automobile head lights, fluorescent light or mercury light.

- Four Frequencies Selections: 4 separate choices of frequency avoids cross-talk in stacked or long linear installations.

- Beam Transmission Strength Selection: 2 levels of beam transmission strength which can be set to suit the protection distance.

- Easy Beam Alignment

   + Audible signal for alignment: An alignment tone aids in quick set-up to beams. The tone becomes maximum at peak of beam level.

   + Sensitivity attenuation LED: Lights when beam level is attenuated, which shows low sensitivity.

   +  Monitor jack output.

- Auto-Gain Lock: Optimal sensitivity gain is automatically set at any coverage distance up to the maximum protection distance. Auto-Gain lock is easily confirmed by sound check.

- Programmed Agc: Sensitivity is automatically increased in bad weather to contend with fog, heavy rain, frost or snow.

- Alarm Memory: Alarm memory LED located on receiver can be automatically reset (flickering 5 min. after an alarm and auto-reset 55 min. after that) or manually controlled.

- Environmental Module Built-In: Environmental trouble signal is sent when beam reception level is reduced below an acceptable level.

- Other Features

   + Wide adjustment (horizontally +/-90°, vertically +/-10°).

   + Target color.

   + Optional accessories.

Thông số kỹ thuật

- Xuất xứ: Nhật Bản.

- Bảo hành: 12 tháng.