92K Nguyễn Thái Sơn - Phường 3 - Q.Gò Vấp - Tp.HCM 
info@sieuthivienthong.com
(028) 7300 1535Hỗ trợ kinh doanh
Chăm sóc khách hàng
0916 287 068 Actuator THEBEN RMG 4 I KNX
Actuator THEBEN RMG 4 I KNX
- 4-way C load switching actuator MIX2.
- With current recognition.
- For higher lamp loads.
- Base module MIX2.
- Can be upgraded to maximum of 12 channels.
- Up to two extension modules MIX or MIX2 can be connected to one base module.
- Device and KNX bus module can be swapped independently of each other.
- Removable KNX bus module enables devices to be changed without reprogramming.
- Manual set-up and use of switching actuators is possible without KNX bus module.
- LED switching status display for each channel.
- Manual operation on device (even without bus connection).
- Adjustable characteristics: e.g. switching, delayed switching, pulse function.
- Links, type of contact (NC contact/NO contact) and participation in central commands such as continuous On, continuous Off, central switching and save/call up scene.
- Switching functions: On/Off, pulse, On/Off delay, staircase light with warning.
- Logical links: e.g. lock, AND, release, OR.
Specifications
| Model | RMG 4 I KNX |
| Operating voltage KNX | Bus voltage, |
| Operating voltage | 110 – 240 VAC |
| Frequency | 50 – 60 Hz |
| Stand-by consumption | ~1,3W |
| Capacity loss max. | 2,4W |
| Installation type | DIN rail |
| Width | 4 modules |
| Type of connection | KNX bus terminal |
| Max. cable cross section | Solid wire: 0.5 mm² (Ø 0.8) to 4 mm² | Stranded wire with end sleeve: 0.5 mm² to 2.5 mm² |
| Number of channels | 4 |
| Type of contact | NO contact, 16A, 10A |
| Opening width | < 3 mm |
| Resistive load | 3680W |
| Capacitive load | 200 µF |
| Incandescent lamp load | 2600W |
| Fluorescent lamp load (conventional) parallel-corrected | 2000 W (200 µF) |
| Fluorescent lamp load (electronic ballast) | 1650 W |
| Energy saving lamps | 410 W |
| LED lamp < 2 W | 75 W |
| LED lamp 2-8 W | 250 W |
| LED lamp > 8 W | 300 W |
| Voltage output | 240 VAC |
| Switching output | Potential-free |
| Switching of various phases | Possible |
| Suitable for SELV | Yes if all channels switch at SELV |
| Accuracy current measurement | I > 1 A: ± 8 % of measured value; I < 1 A: ± 100 mA; lowest measurable value: 150 mA |
| Ambient temperature | -5°C … +45°C |
| Type of protection | IP20 |
| Protection class | II according to EN 60 669 |
- Hãng sản xuất THEBEN của Đức.
- Bảo hành: 12 tháng.
| Tel: | (028) 7300 1535 |
| Showroom: | 92K Nguyễn Thái Sơn - Phường 3 - Q.Gò Vấp - Tp.HCM |
| Website: | www.sieuthivienthong.com |
| Email: | info@sieuthivienthong.com |
Quảng cáo
